Signaling of Uhlmann & Zacher secured by BlueID
Signaling of Uhlmann & Zacher secured by BlueID
UX for lock state
The U&Z handles and knobs provide only feedback to the current command. In contrast, U&Z wallreaders also show the current state of the lock by constantly blinking the appropriate LED:
State |
Blink color |
locked |
|
open |
|
permanently open |
|
UX for command
The following commands are implemented and can be interpreted by the
firmware. For more information regarding the BlueID Access Commands
please refer to the BlueID Access Commands
documentation.
Command |
Action |
Success |
Failure |
tokn |
Engage coupling for 5s |
1x1x |
1x |
enof |
Engage coupling permanently |
1x |
1x |
diof |
Disengage coupling permanently |
1x |
1x |
time |
Set the time |
1x |
1x |
gtim |
Get the time |
1x |
1x |
cual |
Clear the users access log |
1x |
1x |
gual |
Get the user access log |
1x |
1x |
vers |
Get the lock's firmware version |
1x |
1x |
boot |
Switch to FOTA bootloader |
1x |
1x |
mtnc |
Switch into maintenance / UUZ program mode |
1x |
1x |
ckfw |
check and compares the FW version of the AVR controller specified in the project with the one actually read from the AVR |
1x |
1x |
Legend
UX for NFC
Action |
UX |
From version |
An NFC card has been detected but it isn't a BlueID card (or not initialized) |
1x |
UUZ 6 |
A BlueID NFC card has been detected, but card version is too old |
1x |
UUZ 6 |
A BlueID NFC card has been detected, but no ticket has been found |
1x |
UUZ 6 |
A BlueID NFC card has been detected, but although there are tickets on it, none of them is valid for the secured object |
1x |
UUZ 6 |
Generic NFC Error |
1x |
UUZ 1 |
Lock not initialised to a ServiceKey |
3 beeps + 12x |
UUZ 6 |
Legend
Presentation |
Description |
|
Blink and Beep |
|
Blink |
Standard Uhlmann & Zacher Signals